Lumecon LED Wall Pack

Lumecon LED Wall Pack

SPECIFICATIONS: Lumecon LED Wall Pack Fixtures utilizing Relume Technologies High Output LED Silver Circuitry are full cut-off rated LED luminaires. The units are designed for maximum thermal dissipation of heat away from the LEDs. Limiting the temperature rise of the LED at the mounting position to under 45°F (25°C) during continuous operating conditions, insures projected life and luminous output.

LED LIGHT ENGINE CONSTRUCTION: The Relume High Output LED Light engine panel consists of circuit board conductors comprised of an insulated aluminum substrate with a minimum thickness of 0.080 inch. Circuit conductors and LED attachment adhesive is no less than 90% pure silver to insure optimal electrical and thermal conductivity. The complete face of the LED light engine panel is uniformly coated with a 2 part UV stabilized urethane resin, no thinner than 0.002 inch (dry) to adequately protect the light engine panel from moisture and corrosion, meeting GM4901 paint specifications.

LED LIGHT COLOR / QUALITY: The High Output LEDs range from 5,500K to 7,000K on the Kelvin temperature scale and are rated for a minimum of 70,000 hours of continuous operation at ambient temperatures from -40°F (-40°C) to 95°F (+35°C ).

Housing: Die-cast aluminum housing and hinged full cutoff front frame, 1/2” coin plugs with O-rings for conduit and photocell, textured architectural bronze powdercoat finish over a chromate conversion coating.

Lens: Flat tempered clear glass lens.

Mounting: Cast-in template for mounting directly over a 4” recessed outlet box, or use 1/2” surface. Optional Adjustable yoke, allows 40° vertical swivel, incl. hardware

WATTAGE: LED: 38W

LUMEN OUTPUT: 1731 total delivered Lumens

ELECTRICAL: Each power supply (driver ) is UL class 2 compliant, IP66 rated, operating from a 60 HZ +/- 3 HZ AC line over a voltage ranging from 95 volts to 280 volts. Each driver is an efficient switcher with a power factor of greater than 0.91 with an input current of less than 20% Total Harmonic Distortion (THD). Fluctuations of the line voltage have no visible effect on the luminous output. Each driver includes voltage surge protection to withstand high repetition noise transients while meeting emission limits as set forth by the FCC Title 47, Subpart B, Section 15. 347-480 volt 50/60 HZ driver available at an additional cost.

ENVIRONMENTAL: All Relume Light engines fully comply with the Restriction of Hazardous Substances Directives (RoHS) adopted in February 2003 by the European Union.

QUALITY ASSURANCE: All Relume Light engines have been independently tested and passed FDOT environmental requirements A615-2(Operating Voltage and Frequency), A615-3(Power Interruption), A615-4 (Temperature and Humidity), A615-5 (Vibration), A615-6 (Shock), A615-7 (Transients: Power Service, Input-Output Terminals and Non-Destruct Transient Immunity). Relume has also been UL wet or damp rated, and FCC tested and approved. In production, each Light engine panel is burned-in for an 8 hour period and certified for compliance by Relume internal QA process. A quality control tracking label, including date of manufacture, is mounted on the inside of the LED Light engine panel.

Listings & Ratings: CSA: Listed for wet locations
Meets Dark Sky requirements

PATENT NUMBERS 6,582,100 B1: 6,428,189,B1: 6,045,240: 5,857,767: 5,785,418: 5,783,909: 5,782,555