LUMECON ETD™ SYSTEM:
The Lumecon High Output LED Light engine utilizes the Lumecon ETD™ (Enhanced Thermal Dissipation) System. The ETD System Engines are thermally bonded to provide maximum thermal dissipation to the exterior of the fixture to ensure long life. To protect the light engine panel from moisture and corrosion, the LED light engine panel is uniformly coated with a UV stabilized acrylic polymer resin that meets MIL and ASTM dielectric standards and UL and IPC standards for flammability, moisture resistance and thermal shock.
LWP-FC-30 – 30W
LWP-FC-60 – 60W
LWP-FC-30 – 2,108 lumens
LWP-FC-60 – 3,875 Lumens
LED LIGHT COLOR / QUALITY:
The High Output LEDs come standard in 4,700K Neutral White, with 3,250K Warm White and 6,250K Cool White on the Kelvin temperature scale. All are rated for a minimum of 90,000 hours of continuous operation at ambient temperatures from -40°F (-40°C) to 149°F (+65°C).
Die-cast aluminum housing and hinged top, textured architectural bronze powder coat finish over a chromate conversion coating.
Flat tempered clear glass lens or prismatic glass lens.
Cast-in template for mounting directly over a 4” recessed outlet box, or use 1/2” surface conduit.
The LED power supply is UL Class 2 rated and RoHS compliant. It automatically accepts any input voltage from 120VAC to 277VAC and also features optional 0-10V dimming inputs. The power supply has a rated lifetime of 100,000 hours under normal operating conditions. Additional options include button photocell, inline fuse and 20kV surge suppressor.
BATTERY BACK-UP (Optional):
When normal power fails, the emergency driver, which works in conjunction with the AC LED driver, immediately switches into emergency mode, operating the LEDs for a code-compliant 90 minutes. When AC power is restored, the driver automatically returns to charging mode. This is a UL Recognized component, and meets all applicable safety standards.
OCCUPANCY SENSOR (Optional):
Outdoor motion sensors provide occupancy based control of outdoor lighting. Raintight and rated for -40°F to 130°F, sensors perform reliably in all weather conditions. Available for on/off or dim/high functionality.
SPLIT CIRCUIT EMERGENCY EGRESS (Optional):
The split-circuit wiring consists of two independent circuits of LEDs that allow for one of the circuits to be fed by a remote emergency backup power source separate from the main supply.
ETL Listed to UL 1598 / 8750 for Wet Locations
*Meets Buy American requirements within the ARRA
All Lumecon ETD Light Engines fully comply with the Restriction of Hazardous Substances Directives (RoHS) adopted in February 2003 by the European Union.
1 – 120v – 277v
2 – 347v – 480v
Meets Dark Sky Requirements.
For all available options see LWP-FC Cut Sheet
Download the LWP-FC - Full Cut-Off Wallpack Cut Sheet (rev. 2.25.2015) (PDF format)
Download Photometric Results in an IES File Format