LUMECON ETD™ SYSTEM:
The Lumecon High Output LED Light engine utilizes the Lumecon ETD™ (Enhanced Thermal Dissipation) System. The ETD System Engines are thermally bonded to provide maximum thermal dissipation to the exterior of the fixture to ensure long life. To protect the light engine panel from moisture and corrosion, the LED light engine panel is uniformly coated with a UV stabilized acrylic polymer resin that meets MIL and ASTM dielectric standards and UL and IPC standards for flammability, moisture resistance and thermal shock.
LED LIGHT COLOR / QUALITY:
The High Output LEDs come standard in 4,700K Neutral White, with 3,250K Warm White and 6,250K Cool White on the Kelvin temperature scale. All are rated for a minimum of 90,000 hours of continuous operation at ambient temperatures from -40°F (-40°C) to 149°F (+65°C).
15” diameter die cast surface mount housing, chromate conversion coating, coin plugs on sides and back, built-in template for mounting to electrical box, silicone gasket.
Available with either clear molded prismatic borosilicate glass lens (standard) or borosilicate frost molded glass lens. Available with open (standard), half-cutoff or grid-style frame.
Cast-in template for mounting directly over a 4”recessed outlet box, or use 1/2” surface conduit. Optional die cast aluminum ring allows recessed mounting of fixture. 19 1/2”outside diameter.
The LED power supply is UL Class 2 rated and RoHS complaint. It automatically accepts any input voltage from 120VAC to 277VAC and also features optional
0-10V dimming inputs. The power supply has a related lifetime of 100,000 hours under nornal operating conditions and ambient air temperatures of 77°F or less. Additional options include button photocell, inline fuse and 20kV surge suppressor.
When normal power fails, the emergency driver, which works in conjunction with the AC LED driver, immediately switches into emergency mode, operating the LEDs for a code-compliant 90 minutes. When AC power is restored, the driver automatically returns to charging mode. This is a UL Recognized component, and meets all applicable safety standards.
SPLIT CIRCUIT EMERGENCY EGRESS (Optional):
The split-circuit wiring consists of two independent circuits of LEDs that allow for one of the circuits to be fed by a remote emergency backup power source separate from the main supply.
OCCUPANCY SENSOR (Optional):
Outdoor motion sensors provide occupancy based control of outdoor lighting. Raintight and rated for -40°F to 130°F, sensors perform reliably in all weather conditions. Available with on/off or dim/high functionality.
ETL Listed to UL 1598 / 8750 for Wet Locations
*Meets Buy American requirements within the ARRA
For all available options see LWP-BH Cut Sheet
Download the LWP-BH - Bulkhead / Canopy Cut Sheet (rev. 9.23.2014) (pdf format)
Download LWP-BH photometric data (.ies format)