LED LIGHT COLOR / QUALITY:
The High output LEDs range from 5,500K to 6,300K Cool White with an available option of 3,000K to 3,700K Warm White or 4,100K to 4,700K Neutral White on the Kelvin Tempurature scale. All are related for a minimum of 90,000 hours of continuous operation at ambient tempuratures from -40°F (-40°C) to 95°F (+35°C).

HOUSING:
Die cast aluminum housing, 1/2" coin plugs with O-rings for conduit & photocell on two sides and back, textured architectual bronze powdercoad finish over a chromate conversion coating.

LENS:
Clear prismatic polycarbonate lens.

MOUNTING:
Mount directly over a recessed electrical box or use 1/2" surface conduit.

ELECTRICAL:
Each constant current power supply (LED driver) is UL8750 recognized, CE certified to EN61347-1 and -2-13, and IP67 rated.  The drivers are self-switching to accept any input voltage from 120-277VAC and 50-60Hz frequency range.  The driver has a built-in over-voltage and short-circut protection, and is EN61000 compliant for THD, flicker/fluctuation, burst transients (L4), and RFI (L3). 347-480v transformer available at an additional cost.

BATTERY BACK-UP (Remote only optional):
When normal power fails, the emergency driver, which works in conjunction with the AC LED driver, immediately switches into emergency mode, operation LEDs for a cod-complian 90 minutes.  When AC power is restored, the driver automatically returns to chargin mode.  This is a UL recognized component, and meets all applicable safety standards.

SPLIT CIRCUIT EMERGENCY EGRESS (Optional):
The split circuit wiring consists of two independent circuits of LEDs that allow for one of the circuits to be fed by a remote emergency backup power source from the main supply.

OCCUPANCY SENSOR (Optional):
Outdoor motion sensors provide occupancy based control of outdoor lighting.  Rainlight and rated for -40°F (-40°C) to 130°F (54.4445°C).  Sensors perform reliably in all weather conditions.

PATENT NUMBER(S):
5,857,767

UL and cUL listed for wet locations

Download the LWP6 - Small Wall/Canopy Light Cut Sheet (rev. 2011.6.9) (PDF format)

Download photometric results in an IES file format