|
LED LIGHT COLOR / QUALITY:
The High Output LEDs range from 5,500K to 6,300K Cool White with an available option of 3,000 to 3,700K Warm White on the Kelvin temperature scale. Both are rated for a minimum of 110,000 hours of continuous operation at ambient temperatures from -40°F (-40°C) to 95°F (+35°C).
HOUSING:
15” Diameter Die Cast Surface Mount Housing, Chromate Conversion Coating, Coin Plugs On Sides And Back, Built-In Template For Mounting To Electrical Box, Silicone Gasket.
LENS:
Available With Either Clear Molded Prismatic Borosilicate Glass Lens (Standard) Or Borosilicate Frost Molded Glass Lens. Available With Open (Standard), Half-Cutoff Or Grid-Style Frame
MOUNTING:
Cast-in template for mounting directly over a 4”recessed outlet box, or use 1/2” surface. Optional DIE CAST ALUMINUM RING ALLOWS RECESSED
MOUNTING OF FIXTURE:
19 1/2” OUTSIDE DIAMETER.
ELECTRICAL:
Each constant current power supply (LED driver) is UL8750 recognized, CE certified to EN61347-1 and -2-13, and IP67 rated. The drivers are selfswitching to accept any input voltage from 120-277VAC and 50-60Hz frequency range. The driver has built-in over-voltage and short-circuit protection, and is EN61000-compliant for THD, flicker/fluctuation, burst transients (L4), and RFI (L3). 347-480 Volt transformer available at an additional cost.
BATTERY BACK-UP (Remote only optional):
When normal power fails, the emergency driver, which works in conjunction with the AC LED driver, immediately switches into emergency mode, operating the LEDs for a code-compliant 90 minutes. When AC power is restored, the driver automatically returns to charging mode. This is a UL Recognized component, and meets all applicable safety standards.
SPLIT CIRCUIT EMERGENCY EGRESS (Optional):
The split-circuit wiring consists of two independent circuits of LEDs that allow for one of the circuits to be fed by a remote emergency backup power source separate from the main supply.
OCCUPANCY SENSOR (Optional):
Outdoor motion sensors provide occupancy based control of outdoor lighting. Raintight and rated for -40°F to 130°F, sensors perform reliably in all weather conditions.
Voltage:
1 – 120v – 277v
3 – 347v – 480v
Lens:
C– Clear Prismatic
F – Frost Prismatic
Top Frame Assembly:
O – Open Frame
G – Grille
H – Half Cutoff
Options:
P- Photocell
BB- Battery Back-up
BBCD – Battery Back-up Cold
OC – Occupancy Sensor
SCEE – Split Circuit Emergency Egress
UL and cUL Listed for Wet Locations.
PATENT NUMBER(S):
5,857,767
Download the LWP5 - Bulk Head Wall Pack Cut Sheet (rev. 2011.6.9) (PDF Format)
Download Photometric Resutls in an IES File Format
|
