LUMECON ETD™ SYSTEM:
The Lumecon High Output LED Light engine utilizes the Lumecon ETD™ (Enhanced Thermal Dissipation) System. The ETD System Engines are thermally bonded to provide maximum thermal dissipation to the exterior of the fixture to ensure long life. To protect the light engine panel from moisture and corrosion, the complete face of the LED light engine panel is uniformly coated with a UV stabilized acrylic polymer resin that meets MIL and ASTM dielectric standards and UL and IPC standards for flammability, moisture resistance and thermal shock.
LED LIGHT COLOR / QUALITY:
The High Output LEDs come standard in 4700K neutral white, with 3250K warm white and 6250K cool white also available. All are rated for a minimum of 90,000 hours of continuous operation at ambient temperatures from -40°F (-40°C) to 95°F (+35°C).
Die-cast aluminum housing, front frame & ballast box with bronze powdercoat finish over a chromate conversion coating. Housing swivels from 0° to 30° and includes angle indicators at adjustment points.
Tempered glass lens.
Easy-Hang Wall bracket (Included); allows one-person mounting!
Each power supply (driver ) is UL 1310 compliant, operating from a 60 HZ +/- 3 HZ AC line over a voltage ranging from 95 volts to 280 volts. Each driver is an efficient switcher with a power factor of greater than 0.91 with an input current of less than 20% Total Harmonic Distortion (THD). Fluctuations of the line voltage have no visible effect on the luminous output. Each driver includes voltage surge protec tion to withstand high repetition noise transients while meeting emission limits as set forth by the FCC Title 47, Subpart B, Section 15. 347-480 volt 50/60 HZ driver available at an additional cost. Additional options include button photocell, 2.5A inline fuse, and 10kV surge suppressor.
BATTERY BACK-UP (Optional):
When normal power fails, the emergency driver, which works in conjunction with the AC LED driver, immediately switches into emergency mode, operating the LEDs for a code-compliant 90 minutes. When AC power is restored, the driver automatically returns to charging mode. This is a UL Recognized component, and meets all applicable safety standards.
OCCUPANCY SENSOR (Optional):
Outdoor motion sensors provide occupancy based control of outdoor lighting. Raintight and rated for -40°F to 130°F, sensors perform reliably in all weather conditions. Available for on/off or dim/high functionality.
For all available options see LWP-LA Cut Sheet
Download the LWP-LA - Large Adjustable Wall Pack / Area Light (rev. 3.2013) (PDF Format)
Download LWP-LA photometric data (.ies format)