LUMECON ETD™ SYSTEM:
The Lumecon High Output LED Light engine utilizes the Lumecon ETD™ (Enhanced Thermal Dissipation) System.  The ETD System Engines are thermally bonded to provide maximum thermal dissipation to the exterior of the fixture to ensure long life.  To protect the light engine panel from moisture and corrosion, the complete face of the LED light engine panel is uniformly coated with a UV stabilized acrylic polymer resin that meets MIL and ASTM dielectric standards and UL and IPC standards for flammability, moisture resistance and thermal shock.

LED LIGHT COLOR / QUALITY:
The High Output LEDs come standard in4700K neutral white, with 3250K warm white and 6250K cool white also available. All are rated for a minimum of 90,000 hours of continuous operation at ambient temperatures from -40°F (-40°C) to 95°F (+35°C).

LED WATTAGE:
30.4W

LUMEN OUTPUT:
2,532 lumens

HOUSING:
15” diameter die cast surface mount housing, chromate conversion coating, coin plugs on sides and back, built-in template for mounting to electrical box, silicone gasket.

LENS:
Available with either clear molded prismatic borosilicate glass lens (standard) or borosilicate frost molded glass lens. Available with open (standard), half-cutoff or grid-style frame.

MOUNTING:
Cast-in template for mounting directly over a 4”recessed outlet box, or use 1/2” surface conduit. Optional die cast 19 1/2" OD aluminum ring allows recessed mounting of fixture.

ELECTRICAL:
Each constant current power supply (LED driver) is UL Class 2 rated and RoHS compliant. It automatically accepts any input voltage from 120VAC to 277VAC and also features 0-10V electronic dimming inputs.  The power supply has a rated lifetime of up to 100,000 under normal operating conditions and ambient air temperatures of 77°F or less.  347-480 Volt transformer available at an additional cost.  Additional options for power management include button photocell, 2.5A inline fuse, and 10kV surge suppression.

BATTERY BACK-UP (Remote only, optional):
When normal power fails, the emergency driver, which works in conjunction with the AC LED driver, immediately switches into emergency mode, operating the LEDs for a code-compliant 90 minutes. When AC power is restored, the driver automatically returns to charging mode. This is a UL Recognized component, and meets all applicable safety standards.

SPLIT CIRCUIT EMERGENCY EGRESS (Optional):
The split-circuit wiring consists of two independent circuits of LEDs that allow for one of the circuits to be fed by a remote emergency backup power source separate from the main supply.

OCCUPANCY SENSOR (Optional):
Outdoor motion sensors provide occupancy based control of outdoor lighting. Raintight and rated for -40°F to 130°F, sensors perform reliably in all weather conditions. Available with on/off or dim/high functionality.

UL and cUL Listed for Wet Locations.

For all available options see LWP-BH Cut Sheet

Download the LWP-BH - Bulkhead / Canopy Cut Sheet (rev. 3.2013) (pdf format)

Download LWP-BH photometric data (.ies format)