SPECIFICATION:
LEDs are mounted to the inside of the Trim Ring which also doubles as a heat sink for optimal heat dissipation. This process allows the heat generated by LEDs to exit the globe helping achieve a rated for a minimum of 110,000 hours of continuous operation at ambient temperatures from -40°F (-40°C) to 95°F (+35°C ).

LED LIGHT COLOR:
the Ring of Fire uses a special “outdoor white” Cree High Output XPG LED that fall in the 4300K on the Kelvin temperature scale. Perfect for promoting safety, security and high visibly.

GLOBE:
A two-piece, post top component which features precise prisms achievable only through injection molding. The prisms provide pleasing daytime “prismatic sparkle” and provide excellent uniformity, light distribution and efficiency for nighttime performance.

ELECTRICAL:
Each power supply (driver ) is UL class 2 compliant, IP66 rated, operating from a 60 HZ +/- 3 HZ AC line over a voltage ranging from 95 volts to 280 volts. Each driver is an efficient switcher with a power factor of greater than 0.91 with an input current of less than 20% Total Harmonic Distortion (THD). Fluctuations of the line voltage have no visible effect on the luminous output. Each driver includes voltage surge protection to withstand high repetition noise transients while meeting emission limits as set forth by the FCC Title 47, Subpart B, Section 15. 347-480 volt 50/60 HZ driver available at an additional cost.

Voltage:
1 – 120v – 277v
3 – 347v – 480v

Download the LROF - Ring of Fire Cut Sheet  (rev. 2011.6.9) (PDF Format)