LUMECON ETD™ SYSTEM:
The Lumecon High Output LED Light engine utilizes the Lumecon ETD™ (Enhanced Thermal Dissipation) System.  The ETD System Engines are thermally bonded to provide maximum thermal dissipation to the exterior of the fixture to ensure long life.  To protect the light engine panel from moisture and corrosion, the complete face of the LED light engine panel is uniformly coated with a UV stabilized acrylic polymer resin that meets MIL and ASTM dielectric standards and UL and IPC standards for flammability, moisture resistance and thermal shock.

LED LIGHT COLOR / QUALITY:
The High Output LEDs come standard in 4700K neutral white, with 3250K warm white and 6250K cool white also available. All are rated for a minimum of 90,000 hours of continuous operation at ambient temperatures from -40°F (-40°C) to 95°F (+35°C).

LED WATTAGE:
18.89 W

LUMEN OUTPUT:
1867 lumens

HOUSING:
Die cast aluminum housing, ½” coin plugs with o-rings for conduit & photocell on two sides and back, textured architectural bronze powdercoat finish over a chromate conversion coating.

LENS:
Clear prismatic polycarbonate lens.

MOUNTING:
Mount directly over a recessed electrical box or use 1/2" surface conduit.

ELECTRICAL:
The LED power supply is UL Class 2 rated and RoHS compliant.  It automatically accepts any input voltage from 120VAC to 277VAC and also features 0-10V dimming inputs. The power supply has a rated lifetime of 100,000 hours under normal operating conditions and ambient air temperatures of 77ºF or less. Additional options include button photocell, 2.5A inline fuse and 10kV. 347-480v transformer available at an additional cost.

BATTERY BACK-UP (Remote only, optional):
When normal power fails, the emergency driver, which works in conjunction with the AC LED driver, immediately switches into emergency mode, operation LEDs for a cod-complian 90 minutes. When AC power is restored, the driver automatically returns to chargin mode. This is a UL recognized component, and meets all applicable safety standards.

SPLIT CIRCUIT EMERGENCY EGRESS (Optional):
The split circuit wiring consists of two independent circuits of LEDs that allow for one of the circuits to be fed by a remote emergency backup power source from the main supply.

OCCUPANCY SENSOR (Optional):
Outdoor motion sensors provide occupancy based control of outdoor lighting. Raintight and rated for -40°F to 130°F, sensors perform reliably in all weather conditions. Available for on/off or dim/high functionality.


For all available options see LC-SM Cut Sheet

Download the LC-SM- Small Stairwell / Passageway Light Cut Sheet (rev. 3.2013) (PDF format)

Download photometric results for the LC-SM (.ies format)