LUMECON ETD™ SYSTEM:
The Lumecon High Output LED Light engine utilizes the Lumecon ETD™ (Enhanced Thermal Dissipation) System. The ETD System Engines are thermally bonded to provide maximum thermal dissipation to the exterior of the fixture to ensure long life. To protect the light engine panel from moisture and corrosion, the LED light engine panel is uniformly coated with a UV stabilized acrylic polymer resin that meets MIL and ASTM dielectric standards and UL and IPC standards for flammability, moisture resistance and thermal shock.
LED LIGHT COLOR / QUALITY:
The High Output LEDs come standard in 4,700K Neutral White, with 3,250K Warm White and 6,250K Cool White on the Kelvin temperature scale. All are rated for a minimum of 90,000 hours of continuous operation at ambient temperatures from -40°F (-40°C) to 149°F (+65°C).
Die cast aluminum housing, ½” coin plugs with o-rings for conduit & photocell on two sides and back, textured architectural bronze powdercoat finish over a chromate conversion coating.
Clear prismatic polycarbonate lens.
Mount directly over a recessed electrical box or use ½” surface conduit.
The LED power supply is UL Class 2 rated and RoHS compliant. It automatically accepts any input voltage from 120VAC to 277VAC and also features optional 0-10V dimming inputs. The power supply has a rated lifetime of 100,000 hours under normal operating conditions and ambient air temperatures of 77ºF or less. Additional options include button photocell, 2.5A inline fuse and 20kV surge suppressor.
BATTERY BACK-UP (Remote only, optional):
When normal power fails, the emergency driver, which works in conjunction with the AC LED driver, immediately switches into emergency mode, operating the LEDs for a code-compliant 90 minutes. When AC power is restored, the driver automatically returns to charging mode. This is a UL Recognized component, and meets all applicable safety standards.
SPLIT CIRCUIT EMERGENCY EGRESS (Optional):
The split-circuit wiring consists of two independent circuits of LEDs that allow for one of the circuits to be fed by a remote emergency backup power source separate from the main supply.
OCCUPANCY SENSOR (Optional):
Outdoor motion sensors provide occupancy based control of outdoor lighting. Raintight and rated for -40˚F to 130˚F, sensors perform reliably in all weather conditions. Available for on/off or dim/high functionality.
*Meets Buy American requirements within the ARRA
For all available options see LC-SM Cut Sheet
Download the LC-SM- Small Stairwell / Passageway Light Cut Sheet (rev. 9.4.2014) (PDF format)
Download photometric results for the LC-SM (.ies format)