The Relume High Output LED Street Light products are cut-off rated IDA compliant LED luminaires. The units are designed for maximum thermal dissipation of heat away from the LEDs. Limiting the temperature rise of the LED at the mounting position to under 45F (25C) under continues operating conditions to insure projected life and luminous output.

LED Light Engine Construction:  Relume Technologies LED Light panel consists of a circuit board conductors comprised of an insulated aluminum substrate with a minimum thickness of 0.080 inch. Circuit conductors and LED attachment adhesive is no less than 90% pure silver to insure optimal electrical and thermal conductivity. The complete face of the LED light engine panel is conformally coated with a 2 part UV stabilized urethane resin, no thinner than 0.002 inch (dry) to adequately protect the light engine from moisture and corrosion meeting GM4901 paint specifications.

LED Light Color/ Quality: The units utilize high output white LEDs ranging from 5,500 to 6,500 on the Kelvin temperature scale and are rated for a minimum of 70,000 hours of continuous operation from -40F (-40C) to 122F (+50C).

Housing: Aircraft Quality 6061 Aluminum is extruded to form the skeletal structure and thermal dissipation sink all in one. The unit is then capped with an acrylic/abs composite thermo formed solar shield limiting solar heating, preventing thermal degradation of the LED light engine. Solar shield is attached with stainless steel push pin latches to provide easy tool-less access to the luminaires.

Lenses: Each LED module is protected by a High Impact, UV Stabilized, Sealed, and Non Yellowing Acrylic Lens sealed into place using a high compliance, memory retentive extruded silicone rubber for unobstructed visibility while protecting against moisture, dust, insects, vandals and storm damage while allowing for a Neighborhood friendly, closely defined optical beam pattern.

Electrical: Each power supply (driver) is UL class 2 compliant operating from a 60 HZ +/-3 HZ AC line over a voltage ranging from 95 volts to 280 volts. Each driver is an efficient switcher with a power factor of greater than 0.91 with an input current of less than 20% Total Harmonic Distortion (THD). . Fluctuations of the line voltage have no visible effect on the luminous output. Each driver includes voltage surge protection to withstand high repetition noise transients while meeting emission limits as set forth by the FCC Title 47, Subpart B, Section 15.

Terminal Blocks and Wiring: All wiring and terminal blocks conform to requirements set forth in Section 13.02 of the ITE Publication: Equipment and Material Standards, Chapter 2 (Vehicle Traffic Control Signal Heads)

Environmental: All Relume Light engines fully comply with the Restriction of Hazardous Substances Directive (RoHS) adopted in February 2003 by the European Union.

Quality Assurance: Relume light engines have been independently tested and passed NEMA environmental test A615-2, A615-3, A615-4, A615-5, A615-6, A615-7, UL, CSA and FCC regulations. In production each light engine panel is burned-in for a 24 hour period and certified for compliance by Relume internal QA process. A quality control tracking label including date of manufacture is mounted on the inside of the LED light engine panel.

DOWNLOADS

Specifications Sheet

R3600 Photometric Results PDF Format

R3600 Photometric Results IES Format

R4800 Photometric Results PDF Format

R4800 Photometric Results IES Format

R7200 Photometric Results PDF Format

R7200 Photometric Results IES Format

R10700 Photometric Results PDF Format

R10700 Photometric Results IES Format

* a negative 1 in the lumen place denotes that the test was performed using absolute photometry techniques. Current versions of application software are designed to handle the -1 and should not pose a problem while using them.

** To calculate average lumen output of the LED's over 70000 hours of operation, multiply the provided lumen values by a .95 LLD (lamp lumen depreciation) factor.

Generic layouts for each model at various mounting heights:

R3600 at 20 feet    R3600 at 25 feet    R3600 at 30 feet    R3600 at 40 feet

R4800 at 20 feet    R4800 at 25 feet    R4800 at 30 feet     R4800 at 40 feet

R7200 at 20 feet     R7200 at 25 feet    R7200 at 30 feet     R7200 at 40 feet

R10700 at 20 feet     R10700 at 25 feet R10700 at 30 feet    R10700 at 40 feet